Terms & conditions

Terms & Conditions

GENERAL CONDITIONS:

Seller

As set out herein, the “Seller” refers to Product and Process Engineering I-MAS S.L. ( regardless if it operates under its trade names “Proto&Go!” or “www.protoandgo.com”), a company registered in Spain.

Addressed parties

The Parts Manufacturing Service is exclusively addressed to companies, and any natural or legal person acting in the course of their business or professional activity, whether public or private, is considered a company.

Offer and Acceptance

This Seller Document contains all terms and conditions relating to this transaction. Seller Vendor disagrees with terms and conditions that differ from those contained in a Buyer’s Request for Quote, Purchase Order or other document. Such differing or additional terms and conditions shall not be effective or binding on Seller, unless they are agreed to in writing and signed by a representative of Seller.

Selected ítems

Proto&Go! considers the CAD files supplied by the Customer to be validated and therefore assumes no responsibility if they contain errors.

The customer is responsible for ensuring that the properties and performance of the selected material and finishing meet the requirements of its specific application.

 Tolerances for prototypes

The general tolerances for process manufactured parts is as follows:

Stereolithography (SLA) ± 0.20 mm per 100 mm
Sintering (SLS) ± 0.30 mm per 100 mm
Fused Deposition Modeling (FDM) ± 0.10 – 0.30 mm per 100 mm
Polyjet (OBJ) ± 0.20 mm per 100 mm
Silicone mold (PUR) ± 0.20 – 0.30 mm per 100 mm
Machining tolerances Designation from 0.5 to 6 mm.  from 6 to 30mm.  from 30 to 120mm. from 120 to 400mm.
Metal machining (CNC-M) ± 0.05 mm ± 0.10 mm ± 0.15 mm ± 0.20 mm
Plastic machining (CNC-P) ± 0.10 mm ± 0.20 mm ± 0.30 mm ± 0.50 mm
Conformity with the prototypes

If the customer would like to return the received workpieces due to non- If the customer would like to return the received workpieces due to non-conformity, he must notify this within TWO working days after receiving the workpieces. He must also enclose a report of the complaint, stating the reasons for the return.

After receiving the complaint, the parts will be picked up so that an analysis of the complaint can be carried out in our company. If the incident is confirmed, the parts will be manufactured again if repair is not possible.

Packing and shipping

Unless otherwise requested, parts will be shipped next business day free of freight charges and with invoice enclosed.

Packing will be in cartons unless otherwise requested in advance.

The price refers to delivery from the factory, unless other conditions have been agreed in advance.

If Buyer desires a different method of ex-works delivery for the Products, Buyer must contact Seller to explain its requirements.

For there is no doubt, all shipping and packing according to buyer’s requirements that exceed the standard requirements of packaging ex-works borne by the buyer, unless both parties agree otherwise.

Shipping costs are calculated during the ordering process based on the delivery address.

The products can be delivered to any country.

Delivery term

The delivery time is calculated from the next business day on which the payment associated with the work request is received.

Quotations prepared by the Seller include an estimated delivery date calculated on the basis of input data.

The delivery time generated by the online ordering system is only a preliminary indication of the delivery date and does not obligate the Seller in any way.

The estimated delivery time is calculated on the basis of the working conditions existing at the time of the conclusion of the contract.

However, it depends on the timely delivery of the materials requested by the Seller for the execution of the work.

In the event of delays beyond the Seller’s control resulting from a change in the aforementioned working conditions or from a delay in the delivery of the materials required for the execution of the work, the delivery period shall be reasonably extended and the Seller shall be released from any responsibility for such delay.

If the Customer does not receive the ordered parts, he must notify the Seller within five days from the expected date of receipt.

Quotations

A quotation is valid only for the 3D CAD model on which it is based. Any change to the 3D CAD model requires an updated quotation. Quotations are valid for 30 days, after which prices are subject to change without notice.

Prices and Payment Terms

All prices are quoted in Euro and payments are made in Euro. Payment can be made by Visa, MasterCard, PayPal or bank transfer.

Independent parts of an offer may be invoiced separately. The Seller reserves the right to withhold execution of subsequent components of a quotation or subsequent quotations or to cancel a delivery while there are outstanding invoices.

Taxes, Duties, etc.

Taxes, obligations, etc. Taxes, Duties, etc. Buyer is responsible for all duties and sales, use, excise and other taxes arising out of this transaction (except for taxes based solely on Seller’s taxable income).

Guarantee

Seller assumes no responsibility for the design of the merchandise subject to this transaction. To the extent that the Seller’s staff has recommended design modifications or has contributed a design analysis, simulation or advice, the reason is to help meet the requirements of the manufacturing process itself Seller. Design specifications and performance of the goods subject of this transaction are legal sole responsibility of the buyer.

Seller assumes no responsibility for the selection of materials of the Goods that are the subject of this transaction..

The buyer is solely responsible for ensuring that the materials chosen for the goods to be manufactured by Seller meet regulatory requirements or specifications, by way of example but not limited to Directive 2002/95 / EC on use restrictions certain hazardous substances in electrical and electronic equipment (Directive (RoHS), along with any national legislation implementing the directive, ISO, FDA, UL, CSA, CE, TUV, FCC, NSF and USP. any statement made by the staff seller or specifications concerning materials must be verified by the buyer with the manufacturer of that material.

Responsibility

The liability of the seller towards the buyer in case of actual and proven damage is limited to the amount of the product directly related to the cause of the complaint, regardless of the severity of the damage.

Any further liability of the Seller, e.g. for consequential damages, other indirect damages and damages resulting from the responsibility of third parties, is excluded.

The Buyer undertakes to inspect all products delivered and to verify as soon as possible their conformity with the offer at the time of receipt of the product and before use. No product may be returned without prior written consent of the Seller. If Seller has not received detailed written notice or a substantiated claim within 2 business days of delivery, the Product will be considered accepted. If Buyer chooses not to exercise this control or to use a defective Product, Buyer releases Seller from any liability for the possible consequences of such use.

Compensation

Buyer agrees to defend, and hold Seller (and its employees, agents and representatives) free and harmless from any claims, liabilities, penalties, fines and sanctions of any kind (including, but not limited to, interest, attorneys’ fees, duties, fines, taxes or other governmental sanctions of any kind).

This refers to:

  • Claims, liabilities, penalties, fines and sanctions,arising out of or resulting from any violation of Buyer’s or its Affiliates’ representation, warranty or contract in accordance with this document.
  • If Buyer has provided Seller with drawings, designs or other specifications for the Goods or Services arising out of a claim that the Goods manufactured by Seller in accordance with such drawings, designs or other specifications infringe or misappropriate any patent, copyright, trade secret or other proprietary right.
  • Any other nature arising out of or in relation to this transaction; or it is expressly understood that Buyer will indemnify and defend Seller and hold Seller harmless from claims that Seller was negligent or in default.

If any action, suit or proceeding, or a claim, demand or assessment imposed against Seller (or their employees, representatives or agents), which may result in liability with respect to which a party seeks indemnification is started, then the party will notify the buyer immediately and will have the right, the expenses on their own, to take full control of the defense, compromise or agreement. At the request of the buyer and running it with all expenses, Seller will fully cooperate in such defense and provide the buyer all relevant information under its control.

Force major

Seller shall not be liable for failure to manufacture, deliver or furnish Goods , if such failure or delay is caused by Force Majeure, fire, storms, strikes, power failures, labor disturbances, riots, inability to obtain the materials, equipment, labor or transportation, governmental requirements, serious health or public problems or for similar reasons beyond Seller’s control.

Export laws of the EU

Goods subject of this transaction may be subject to the export control laws of the United States and the country’s laws that restrict the export and reexport of certain sensitive products and technologies, where gum or used. The customer must abide by these laws. The pieces can not be sold, leased or transferred to end users or to restricted countries or to a user involved in weapons of mass destruction or genocide. Upon receiving these pieces, you agree to act as legal responsibility for its use and distribution in compliance with the laws export control of the EU, and comply with such laws, including not distribute or sell the parts to third parties prohibited or end users, as described in the export regulations of the EU, and also agrees to obtain all permits and export approvals that may be required in the case of selling or exporting parts to third parties or countries in need of such permission or approval.

Molds

Due to the type of ownership of the process of Seller, all molds, jigs and software developed by Seller is owned by it and is generally not compatible with other equipment or can be transferred to them. Seller retains ownership of the molds. However, any mold or engineering spending imposed by the seller, such as molds and software produced by Seller shall be the exclusive property of the latter. However, Seller shall not use a template or custom software in the production of goods for any customer Seller, without the express permission of the buyer. As mentioned in this section, “the molded or custom software” refers to the mold or software developed specifically for the buyer and for which the buyer pays the seller separately.

Jurisdiction

The rights and obligations of Seller and Buyer in this contract shall be governed by the laws of Spain. In case of dispute, only the competent courts of the judicial area of the headquarters Seller have exclusive jurisdiction.